Job(s) 16 to 30 of 13,911
12/7/2016
Jackson, WI; Slinger, WI; West Bend, WI
$20 + / - HR.
Recently Posted
CAD / CAM PROGRAMMING OF BRAKE PRESS, TURRET PRESS, LASER, ETC. USING SOLIDWORKS, AMADA DR. ABE, AND / OR MICROSOFT, ETC. BE SURE THAT YOUR PREVIOUS CAD / CAM PROGRAMMING EXPER. IS INCLUDED BEFORE SUBMITTING YOUR INFORMATION. ! ! REFERRAL BONUS AVAILABLE ! ! CALL AND / OR SEND YOUR RESUME TO TOM 41 ...
12/7/2016
Germantown, WI
$17HR - $24HR boe
Recently Posted
BORING BAR EXPERIENCE ONLY. ONLY CANDIDATES WITH BORING BAR EXPERIENCE WILL BE CONSIDERED. LARGE PARTS G & M CODES T/S ABILITY FAMILIAR WITH A VARIETY OF METALS EXPERIENCE WITH OTHER MACHINE TOOLS PLEASE NOTE ALL CANDIDATES MUST HAVE BORING EXP. FOR THE BORING JOB. SEND RESUME TO 414 453 3624 FA ...
12/7/2016
Grafton, WI; Milwaukee, WI; Waukesha, WI
$20 - 22/hr
Recently Posted
Punch Press Set Up Operator Must have experience setting up coil fed Progressive Dies that run in automatic punch presses General Knowledge of Smart packs or similar type press controls Work with automatic feeders (Roll feeders, servo feeders, etc.) Install raw material into coil feeders using mech ...
12/7/2016
Milwaukee, WI; Racine, WI; Waukesha, WI
Not Provided
Recently Posted
Visa Lighting, an Oldenburg Group Company is a Milwaukee based supplier of architectural lighting products used in large venues, such as universities, malls, healthcare facilities and other exciting locations. Founded in 1981 by Wayne C. Oldenburg, its facility is located in Glendale, Wisconsin. We ...
12/7/2016
Weld Shop Supervisor
Are you 'The One' we're seeking?
21st century weld, fab, machine facility
Waukesha, WI
Negotiable
Recently Posted
We have an immediate need for the 'right' person to lead our Welding Dept. Who are we? A large, profitable, light to heavy gage welding, fabrication and machining facility that works with industries from mining to aerospace, from agriculture to construction, from shipping to automotive and e ...
12/7/2016
Turning Center Machinist
Great Opportunity!
Milwaukee, WI; New Berlin, WI; West Allis, WI
$20-24/HR
Recently Posted
Need a machinist for turning centers on 1st shift W/ Mastercam Experience. Min 4 years’ experience needed, Setups, blue prints [ CNC Offset, editing, Tool changes ] Inspection equipment [ Mics, Calipers, Bore , Height, Pin, Plug gages ] Own Tools preferred Mastercam programming of turning cent ...
12/7/2016
Menomonee Falls, WI; Milwaukee, WI; Waukesha, WI
$17 - 21/ D.O.E
Recently Posted
Q.A. Inspector/operate a CMM ESSENTIAL DUTIES AND RESPONSIBILITIES Includes, but is not limited, to the following; other duties may be assigned. Collect samples of parts and follow inspection instructions as listed on the applicable Examine, measure and/or test parts to verify that all customer req ...
12/7/2016
Germantown, WI; Milwaukee, WI; Waukesha, WI
$48 - 60K
Recently Posted
PRODUCTION SUPERVISOR – Direct Hire Opportunities exist for a production supervisor for our 3 rd shift. Company is looking for hands on, energetic and versatile individual with a technical and mechanical background to perform production supervision role. Leadership, problem solving, decision m ...
12/7/2016
Milwaukee, WI; Wauwatosa, WI
45K plus commission
Recently Posted
Service Advisor I have a client that is looking for a service advisor on 1st shift. These are direct hire positions W/ full benefits Qualifications Initial Customer contact person to the service department To be very customer focused Maintain the lines of communication to the customer during the re ...
12/7/2016
1st or 2nd Shift Toolmaker/Mold Maker
GREAT OPPORTUNITY TO GET YOUR FOOT IN THE DOOR AT AN EXPANDING COMPANY!!!
Muskego, WI; New Berlin, WI; Waukesha, WI
D.O.E. Up to $30/HR
Recently Posted
1st or 2nd Shift Toolmaker or Mold maker I have a client that is looking for a Tool Maker or Mold Maker for a job shop environment. Position could be on 1st or 2nd shift depending on the skill set and candidate's shift preference. What you will do Toolmakers are responsible for the coordination ...
12/7/2016
Menomonee Falls, WI; Milwaukee, WI; Waukesha, WI
$18-28/HR
Recently Posted
I have a two clients in the area that are looking for a Boring Bar setup/operator Someone that could program would be a plus! Large Parts 1 2 piece orders 1st (Milwaukee or Tosa area) or 2nd shift (Pewaukee/Waukesha). Salary would be $16 $28 per hour depending on experience. ...
12/7/2016
Menomonee Falls, WI; Milwaukee, WI
$20 - 28
Recently Posted
STAMPING I have a client in the area that is looking for a 1st shift Toolmaker. This positions is with a company that is expanding and not laying off like so many others currently. Position is in the Milwaukee/Menomonee Falls Area Position would be direct hire with OT available. 1st Shift, Direct Hi ...
12/7/2016
Menomonee Falls, WI; Milwaukee, WI
D.O.E. $20-26/HR or so
Recently Posted
Have a unique client in the Milwaukee/Menomonee Falls area that is looking for a 5 Axis Programmer to add onto their team. This person would have extensive experience with the setting up and programming of 5 axis machining centers Position Requirements High school diploma or GED preferred Minimum 3 ...
12/7/2016
Menomonee Falls, WI; Milwaukee, WI
50k-90k
Recently Posted
Mechanical Engineer Company is looking for an engineer that is hopefully not fresh out of college. They would take someone with a couple years or multiple years in a machine shop would be ideal. Engineering support for Project Managers Tool & Design – metal stamping dies; Contract Machini ...
12/7/2016
New Berlin, WI
$18.00 - $20.00/hr
Recently Posted
Responsibility Oversees the hourly workforce to ensure the production of the highest quality products at the lowest possible cost, while meeting company standards for quality and performance, and customer specifications and delivery requirements, in accordance with company policies and procedures. D ...