Not Authorized
You are currently not authorized to access this section.
Please contact your Administrator to change your authorization settings.
Please contact your Administrator to change your authorization settings.
MP&P Technical Analyst 3
Seattle, WA
Job Description
Job Title: MP&P Technical Analyst 3
Duration: 12 months
Location: Seattle, WA
Shifts: 1st shift, on call and part time. Maximum 30 hours a week. Regular hours should be expected, manager is flexible on this schedule.
Job description:
Assists with the development or improvement of inspection or test techniques. Assists in the design and creation of test coupons to validate equipment or determine product acceptance. Follows documented procedures to set up and calibrate specialized test or measurement equipment. Assists in the documentation of procedures for setting up and calibrating test equipment. Follows documented procedures to perform tests or inspections and collects data for evaluation of process equipment, software, solutions, products or materials. Analyzes routine test, inspection or statistical data to determine product and processes conformity or assists with standard corrective action recommendations. Elevates anomalous results as required. Documents and communicates standard test, analysis or measurement results to ensure compliance with regulatory and contractual requirements. Works under general supervision.
Day to Day:
Taking overall photos of parts. Cut, polish and mount specimens for metallographic examination. Take photo-micrographs. Run hardness, micro-hardness and conductivity checks. Support fracture analysis investigations and other engineering requests. This work is focused on aerospace alloys.
Must Haves:
1. Metallography experience
2. Photography imaging analysis experience
3. Microsoft Office Suite
Skills:
SPECTRAFORCE is an equal opportunity employer and does not discriminate against any employee or applicant for employment because of race, religion, color, sex, national origin, age, sexual orientation, gender identity, genetic information, disability or veteran status, or any other category protected by applicable federal, state, or local laws. Please contact Human Resources at nahr@spectraforce.com if you require reasonable accommodation.
Duration: 12 months
Location: Seattle, WA
Shifts: 1st shift, on call and part time. Maximum 30 hours a week. Regular hours should be expected, manager is flexible on this schedule.
Job description:
Assists with the development or improvement of inspection or test techniques. Assists in the design and creation of test coupons to validate equipment or determine product acceptance. Follows documented procedures to set up and calibrate specialized test or measurement equipment. Assists in the documentation of procedures for setting up and calibrating test equipment. Follows documented procedures to perform tests or inspections and collects data for evaluation of process equipment, software, solutions, products or materials. Analyzes routine test, inspection or statistical data to determine product and processes conformity or assists with standard corrective action recommendations. Elevates anomalous results as required. Documents and communicates standard test, analysis or measurement results to ensure compliance with regulatory and contractual requirements. Works under general supervision.
Day to Day:
Taking overall photos of parts. Cut, polish and mount specimens for metallographic examination. Take photo-micrographs. Run hardness, micro-hardness and conductivity checks. Support fracture analysis investigations and other engineering requests. This work is focused on aerospace alloys.
Must Haves:
1. Metallography experience
2. Photography imaging analysis experience
3. Microsoft Office Suite
Skills:
- Look up and Interpret client's Specifications/Drawings
- Basic Computer Skills, Strong Math Skills, Chemical background, Reading comprehension and Report writing
- Macroscopic/Microscopic examination of fasteners and parts to specified criteria and determination of conformity
- Able to prepare and work with chemicals including etchants, and cutting fluids
- Lift, twist, stand, twist and sit for extended periods. Able to carry 25? lbs
- Operation of industrial equipment-band saws, cutting saws, grinding, polishing, etc
- Operation of Precision instruments-microscopes, optical comparators, spectrometers, mechanical test frames
- Cut, mount and polish, chemically etch and interpret metallurgical mounted samples
- May require working at heights and enclosed spaces
- 2-4 yr technical degree Material Science or Metallurgy preferred or equitv Training Program
SPECTRAFORCE is an equal opportunity employer and does not discriminate against any employee or applicant for employment because of race, religion, color, sex, national origin, age, sexual orientation, gender identity, genetic information, disability or veteran status, or any other category protected by applicable federal, state, or local laws. Please contact Human Resources at nahr@spectraforce.com if you require reasonable accommodation.
Job Summary
Company
Start Date
As soon as possible
Employment Term and Type
Regular, Part Time
Required Experience
Open
Email this Job to Yourself or a Friend